Adjustable depth gauge for Pax fret saw

fret slot depth
➡️【Mk.com】✅भारत की ऑनलाइन सट्टेबाजी साइट✅100 से अधिक ऑनलाइन कैसीनो गेम, स्लॉट गेम और सर्वोत्तम सट्टेबाजी बाधाओं के साथ 10K विभिन्न खेल आयोजन हैं। ✅ 

The Fret Slotting Miter Box accommodates fingerboards up to 10mm thick and 74mm wide, Made of aluminum, 305mm long, there are three mounting holes for attaching

Ideally the slot should end up 1o-20% deeper than the fret tang - the small gap underneath is filled usually with superglue Good luck

fret slot depth The Fret Slotting Miter Box accommodates fingerboards up to 10mm thick and 74mm wide, Made of aluminum, 305mm long, there are three mounting holes for attaching

fret slot saw A correct fingerboard thickness should be roughly 14″, meaning your cut depth should roughly be 18″ Cutting at a 18″ depth will ensure that